Difference between revisions of "Installing Polycarbonate Or PVC Roofing Sheets"
(Created page with "Polycarbonate sheets can be used as walls or as roofs. Polycarbonate Roofing Sheets come in variety of color, profile and sizes. The price of these [https://openclipart.org/se...")
Latest revision as of 15:24, 13 February 2020
Polycarbonate sheets can be used as walls or as roofs. Polycarbonate Roofing Sheets come in variety of color, profile and sizes. The price of these sheets varies immensely depending on the profile. The most common profile is a corrugate plastic roofing sheet. The guarantee, which comes along with these sheets, may range from a few months to lifetime depending on the quality of these sheets.
Most of the manufactures of polycarbonate sheets advise an approximate fall of 1 in 5.7 i.e. a 10 degree pitch. You will need extra shielding from weathering elements if you take a sheet of less pitch.
Most of these sheets can be cut with the help of a fine tooth saw or garden scissors. The better of the quality of these sheets, tấm pvc the easier it is to cut them. If you want to cut a sheet at a time, you can even use a disk grinder or carborundum. The only disadvantage is that cutting more than one sheet at a time can lead to fusion and welding of sheets.
Before you fix the sheets, drill the holes. The adequate size of the holes is almost 8- 10mm. The holes should be a little larger than the screw's shaft (at least 2mm) so that there is enough space for the screws to expand and contract. For more details, you can refer to the guide that comes along with the roofing sheets.
You can get appropriate screws from the manufactures of polycarbonate roofing panels. The easiest to use are the one with hexagonal heads. Most sheets are needed to be fixed at every fourth corrugation.